|
|
|
|
|
8w ,18w Air Purifier
|
|
| Model No.︰ | XY-8W |
| Brand Name︰ | OEM |
| Country of Origin︰ | China |
| Unit Price︰ | US $ 5.5 / pc |
| Minimum Order︰ | 100 pc |
|
|
|
|
|
|
|
| Specifications︰ | 8W
16W |
| Advantages︰ | Warnings& Safety Notices
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE ATTEMPTING THE
UV-C AIR STERILIZER INSTALLATION
WARNING: Never expose eyes or skin to the UVC light from any source
Looking directly at UVC light may cause eye damage, or even blindness never operate the UV air purifier outside of the ventilation ducts .Only install in a closed duct system, not at any vented openings
Any duct openings which are in the direct line of eye sight of the
UVC light should be sealed with foil tape or duct tape, or equivalent
WARNING: For indoor use only
This UV air purifier is for indoor installation only. Indoor means inside the
home or building. (Not inside a heat or A/C unit that is outside the home or building)
WARNING: UV lamps contain mercury vapor. Never touch broken lamp glass when you open the tubes which contain the UV lamps inspect carefully
If a lamp is damaged, cracked, or broken, do not touch bulb or any other contents in the carton.
Instead place the lamp back in the tube and call us.
In case of accidental exposure to broken glass from a UV lamp, wash hands and any other skin area that came in contact with soap & water. Remove affected clothing immediately. If skin is cut or scraped seek medical attention immediately.
WARNING: UV light can break down plastic materials not rated for UV exposure The UV air purifier must be mounted at least 30 inches from drain pans, humidifiers, wire insulation, flexible ducting, and other plastics
If the UV air purifier must be mounted close to any of the above you can shield them with aluminum foil tape, sheet metal, or even household aluminum foil.
'WARNING: Do not mount under a humidifier
Water droplets form on a humidifier and drip down which can cause electrical shorts and even electric shock.
WARNING: Always wear safety glasses or goggles when using a power drill
WARNING: Use the supplied rubber glove when handling the lamp glass
Finger grease, which makes a fingerprint, should not be on the glass.
If you touch the glass with your bare hand or finger use isopropyl alcohol to wipe it clean.
Leaving finger grease on the glass causes a hot spot and will cause the lamp to burn out prematurely
|
|
|
Product Image
|
|
|
Related Products
|
|
